Research on the Milling Characteristics of SBS Modified Asphalt Pavement with Different Service Years Using the...

The service years of the milled pavement are varied in numerous SBS modified asphalt pavement milling assignments. To investigate the milling characteristics of SBS (styrene-butadiene-styrene) modified asphalt pavements with different service years, the values of the bonding parameters were calibrated and verified and then used to build three simulation models for the milling of old asphalt pavements with service years of 2~3 years, 7~8 years, and 11~12 years, respectively. The milling characteristics of SBS modified asphalt pavements with different service years were investigated using the moving speed v and rotating speed ω of the milling rotor as test factors, and the particle bonding ratio (Rb) and rotor average force (Fa) as test indexes. The results demonstrate that the following: The regularity of the effects of milling rotor moving speed and rotating speed on the particle bonding ratio and milling rotor average forces remained consistent overall as the pavement age increased. For the same milling parameters, the particle bonding ratio and the rotor average force are reduced. From 2~3 years old pavements to 7~8 years old pavements, the overall reduction in the particle bonding ratio indicator is about 12%, and the average force on the milling rotor is about 24%. From 7~8 years old pavements to 11~12 years old pavements, the overall reduction in the particle bonding ratio indicator is about 3%, and the average force on the milling rotor is about 15%.