A New Concrete Freeze-Thaw Damage Model Based on Hydraulic Pressure Mechanism and Its Application

Freeze-thaw damage is one of the most important factors affecting the durability of concrete in cold regions, and how to quantitatively characterize the effect of freeze-thaw cycles on the degree of damage of concrete is a widely concerning issue among researchers. Based on the hydraulic pressure theory, a new concrete freeze-thaw damage model was proposed by assuming the defect development mode of concrete during freeze-thaw cycles. The model shows that the total amount of defects due to freeze-thaw damage is related to the initial defects and the defect development capacity within the concrete. Based on the new freeze-thaw damage model, an equation for the loss of relative dynamic elastic modulus of concrete during freeze-thaw cycles was established using the relative dynamic elastic modulus of concrete as the defect indicator. In order to validate the damage model using relative dynamic elastic modulus as the defect index, freeze-thaw cycle tests of four kinds of concrete with different air content were carried out, and the rationality of the model was verified by the relative dynamic elastic modulus of concrete measured under different freeze-thaw cycling periods. On this basis, a freeze-thaw damage model of concrete was established considering the effect of air content in concrete. In addition, the model proposed in this paper was supplemented and validated by experimental data from other researchers. The results show that the prediction model proposed in this study is not only easy to apply and has clear physical meaning but also has high accuracy and general applicability, which provides support for predicting the degree of freeze-thaw damage of concrete structures in cold regions.