Related Experiment Video
Updated: Jun 5, 2026
Fabrication of Electrochemical-DNA Biosensors for the Reagentless Detection of Nucleic Acids, Proteins and Small Molecules
Published on: June 1, 2011
A nano-powered green and chemically synthesized Au/MWCNT modified electrochemical sensor for methylene blue detection
Seleke J Mokole1,2, Omolola E Fayemi1,2
1Department of Chemistry, School of Physical and Chemical Sciences, Faculty of Natural and Agricultural Sciences, North-West University (Mafikeng Campus) Private Bag X2046 Mmabatho 2735 South Africa Omolola.Fayemi@nwu.ac.za.
Abstract:
This study explores the development of novel gold nanoparticle (AuNP) and multi-walled carbon nanotube (MWCNT) nanocomposites for methylene blue (MB) dye detection, leveraging both green (Augrn) and chemical (Auchm) synthesis methods. A thorough analysis of the nanomaterials synthesized using green and chemical routes was performed utilizing Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), and transmission electron microscopy (TEM), revealing particle sizes of 13.66 nm and 14.86 nm for Auchm and Augrn, respectively. UV-visible spectroscopy (UV) and X-ray diffraction (XRD) reveal crystallite sizes ranging from 5.36 nm to 21.26 nm. Electrochemical analysis via cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and square-wave voltammetry (SWV) revealed distinct current responses among the synthesized materials. EASA, which is the electrochemical active surface area of the electrodes was calculated, and the values were 0.053 cm2 (Auchm/MWCNTs), 0.031 cm2 (Augrn/MWCNTs), 0.024 cm2 (MWCNTs), 0.006 cm2 (Augrn), 0.005 cm2 (Auchm), and 0.002 cm2 (bare). EIS showed R ct values in the following order: 32.20 Ω < 34.02 Ω < 36.61 Ω < 3.4 × 105 Ω < 3.7 × 105 Ω < 5.6 × 105 Ω for Augrn/MWCNTs, MWCNTs, Auchm/MWCNTs, Auchm, Augrn, and bare electrode, respectively, which correlated with CV oxidation peaks in FeCN, except for the bare electrode due to the n-value of 0.87. The oxidation current response in MB decreased in the order of 124.29 μA for MWCNTs, 114.77 μA for Augrn/MWCNTs, 60.85 μA for Auchm/MWCNTs, 18.96 μA for Auchm, 2.81 μA for bare, and 2.08 μA for Augrn. The limits of detection (LOD) and quantification (LOQ) were determined to be 20.62 nM and 62.51 nM for Auchm/MWCNTs and 20.23 nM and 61.30 nM for Augrn/MWCNTs, respectively, indicating slightly superior sensitivity for Augrn/MWCNTs. Analysis of real-life environmental samples demonstrated the practical applicability of the synthesized electrodes, with recovery percentages ranging from 90% to 107% (n = 3). These findings underscore the dependability and sensitivity of the developed nanocomposites for MB detection.
More Related Videos
10:31Detection and Recovery of Palladium, Gold and Cobalt Metals from the Urban Mine Using Novel Sensors/Adsorbents Designated with Nanoscale Wagon-wheel-shaped Pores
Published on: December 6, 2015
17:16Development of an Electrochemical DNA Biosensor to Detect a Foodborne Pathogen
Published on: June 3, 2018
