Effects of Nanofibrillar Nucleating Agent and Process Conditions on the Crystallization Behavior and Mechanical...

Nanofibers, as nucleating agents, can significantly alter the nucleation and growth dynamics of polymer crystallization, thereby modulating the morphology and structure of crystals to enhance mechanical performance of the materials. In this study, the effects of nanofibrillar nucleating agent 1,3:2,4-di(3,4-dimethylbenzylidene) sorbitol (DMDBS) content, melting temperature, and injection speed on the crystallization behavior and mechanical performance of isotactic polypropylene (iPP) were systematically investigated. The incorporation of DMDBS significantly increased the number of iPP nuclei, reduced crystal size and raised the onset crystallization temperature by approximately 11 °C. Concurrently, the tensile strength and elastic modulus of injection-molded iPP samples improved by 15% and 55%, respectively. However, a rise in the melting temperature led to a decrease in the crystallinity, tensile strength, elastic modulus, and impact strength of both neat iPP and iPP/DMDBS samples. With the increase in injection speed, the tensile strength and elastic modulus of iPP/DMDBS samples increased. During the crystallization process, DMDBS crystallizes prior to the iPP melt, forming the nanofibrillar network that effectively reduced the energy barrier for iPP crystal nucleation. Furthermore, under the influence of shear forces during processing, the presence of these nanofibrillar networks promoted the formation of oriented crystalline structures, which in turn contributed to the enhanced tensile strength and elastic modulus observed in iPP samples.