Use of Secondary Reflectors for Enhanced ESWT Treatment of the Penis

Background: This study aimed to optimize low-intensity extracorporeal shockwave therapy (Li-ESWT) for the treatment of penile indications through the addition of a secondary reflector. The therapeutic potential of Li-ESWT is well-established, but its efficiency is limited by uncontrolled wave propagation and reflection resulting in regions of increased tensile pressures. The objective is to manage and reduce high tensile pressure and enhance treatment efficacy by reflecting applied shockwaves back into the treatment zone using a novel reflector design. Methods: A comprehensive investigation, including numerical modeling and phantom measurements, exploring a range of improvements to traditional shockwave application by reflecting applied therapeutic shockwaves back into the treatment zone. Computational optimization was employed to identify the most suitable secondary reflector shape for potential future clinical use. Subsequent hydrophone phantom reference measurements were extended to volumetric fields using 3D simulations. Results: Traditional treatment resulted in high tensile pressures in the treatment zone, which was mitigated by introducing an impedance-matched layer (IML) while preserving the initial shockwave's therapeutic function. The addition of the secondary reflector enabled controlled refocusing of the therapeutic shockwave back into the initial focal zone, thus either increasing the treatment volume or achieving a rapid secondary application. Choice of the reflector's impedance allowed for the secondary refocusing of either a tensile or positive pressure wave. Conclusions: The combined modifications of employing an IML and secondary reflector eliminate uncontrolled tensile waves and reflections, provide better control over consecutive reflections, and enable repeated shockwave signals with a single applicator shot, potentially reducing the number of required shots per session.