Preparation of Agrowaste-Based Nanocellulose by NaOH-Assisted Ball Milling Technique: Influence of Component
Abstract:
Pineapple peel cellulose nanofibrils (PCNFs) were facilely prepared by the ball milling method assisted by alkali solution (3 wt% NaOH) and a wet grinding medium, using various treated pineapple peels (hot water treatment (WT), bleaching treatment (BT), alkaline treatment (AT), and baleaching-alkaline treatment (ABT)) as raw materials. The structure of the obtained PCNFs (i.e., WT-PCNF, BT-PCNF, AT-PCNF, and ABT-PCNF) was characterized to analyze the influence of component intervention. The results indicated that NaOH-assisted ball milling did not change the crystal structure of cellulose, and the yield and thermal stability of the PCNFs was improved. The average diameters of WT-PCNF, BT-PCNF, AT-PCNF, and ABT-PCNF were 24.16, 21.53, 23.04, and 19.46 nm, respectively, in which BT-PCNF and ABT-PCNF exhibited a higher defibrillating degree and smaller diameter. Particularly, NaOH-assisted ball milling can promote the removal of non-cellulose components. The viscosity and modulus of BT-PCNF were relatively higher due to the presence of residual hemicellulose as a natural linker of fibers. The current research provides insights for simplifying the preparation and functionalization of nanocellulose.
