Composite Materials Based on Biochar Obtained from Tomato Wastes and Fe₃O₄/MnO₂ Used for Paracetamol Adsorption

The pharmaceutical contamination of water, especially by widely used drugs, presents important environmental and health concerns due to the inefficiency of conventional treatment methods. The present study proposes a sustainable solution using biochar (Bch) obtained from tomato waste, functionalized with Fe₃O₄ and MnO₂ nanoparticles, for the removal of paracetamol from aqueous solutions. The composite materials were synthesized, characterized, and evaluated under varying conditions, including pH, temperature, contact time, initial drug concentration, and adsorbent dose. The materials exhibited porous structures with wide pore size distributions. Optimal removal efficiency was achieved for 30 mg L^-1 paracetamol concentration, pH 2, 25 °C, 0.3 g L^-1 adsorbent dose, and 20 min contact time. The Freundlich isotherm provided the best fit for the adsorption data. Kinetic studies revealed that the pseudo-second-order model best described the adsorption process. Thermodynamic parameters indicated that the process was spontaneous, feasible, and exothermic. Compared with similar materials derived from agricultural waste, the tomato waste-based composites demonstrated competitive adsorption capacities. These findings suggest that Bch-HCl/MnO₂ and Bch-HCl/Fe₃O₄/MnO₂ are promising, cost-effective adsorbents for mitigating pharmaceutical pollutants in wastewater.