[Test report on the system components for film processing by the middle-format technology]

Industrially developed accessories for use with medium-format equipment, which have been tested in a-clinical settery, were evaluated separately. The automatic mounting system (Delcadro) with the plastic mount (Cadrix) was accepted by all of our colleagues, and was rated as an advantage, with hardly any reservations. A slight modification is needed in the design of the mounts. This equipment would be a desirable addition to our own equipment for routine work. The daylight system (camera magazine and feeder) is, in principle, certainly a step in the right direction. Handling of the magazine proved to be too complicated and it was prone to malfunctions. Simplification, especially of the loading mechanism, would be desirable. The film feeder is designed for use with conventional roll processing machines. In our opinion, a feeder will always be put to full use if the films processed in this machine are mainly or exclusively of middle format; the darkroom is not permanently staffed and/or adaptation to an existing daylight system (large formats) has already been effected and/or depending on availability, both large and medium size-formats can be processed fully automatically as quickly as possible. However, if films of various formats are processed by an assistant in a darkroom, it is possible to deal with the total quantity of films faster than with a feeder by inserting 3 or 4 medium-format films (or 2 or 3 large-format films) simultaneously. The Heliomat film viewer offers impressive reproductions of 100 mm film on a glare-free glass screen.(ABSTRACT TRUNCATED AT 250 WORDS)