Related Experiment Video
Updated: Sep 9, 2025

Author Spotlight: Enhancing Small Animal Bone Compression Testing for Research
Published on: December 1, 2023
Effect of vibration loads acting on different body regions on lumbar spine: A finite element study based on a
Li-Xin Guo1, Chi Zhang1,2
1School of Mechanical Engineering and Automation, Northeastern University, Shenyang, China.
Abstract:
The effects of vehicle-induced whole-body vibration on human body have received widespread attention, and investigations have found that vibrations would cause lumbar disorders of occupational drivers. Some investigations have revealed the harmful effects of vibrations on human body, but the studies about the effect of vibration applied to different body regions on lumbar spine are limited. In this study, a whole-body finite element model was used to predict the biomechanical response of lumbar spine under vibrations applied to the back of thoracic and lumbar regions, and the bottom of buttock regions, respectively. The results showed that vibrations applied to the thoracic region would cause more intense spine motions, but the vibration applied to the lumbar region would cause higher internal forces, which might cause more injuries. The stress of lumbar spine would tend to increase after superimposed vertical vibration, and this increase might even more significant when the superimposed vibrations applied to the thoracic and buttock regions.
Related Concept Videos
General Case of Eccentric Axial Loading
Consider a member subjected to equal and opposite forces that are applied along a line that does not coincide with the member's neutral axis. In unsymmetrical...
Normal Strain under Axial Loading
Deformation of Member under Multiple Loadings
In the case of a member with a variable cross-section, the strain is not constant but depends on the position. The deformation of an...
Residual Stresses in Bending
Eccentric Axial Loading in a Plane of Symmetry
Flexural Stress
Hooke's Law states that within the material's elastic limits, stress is directly proportional to strain. In a member experiencing a bending moment, the strain at any point is relative to...

