A unique hybrid of vanadium carbide and oxycarbide derived carbon from a preceramic polymer route with faradaic and
Sudhin Sukumaran1, Shantanu K Behera1
1Laboratory for New Ceramics, Department of Ceramic Engineering, National Institute of Technology Rourkela, Rourkela, Odisha 769008, India. behera@alum.lehigh.edu.
Abstract:
Polymer-derived ceramics are a versatile class of multifunctional materials synthesized via the high-temperature treatment of a preceramic polymer. In this work, we report the synthesis of a vanadium carbide-embedded carbonaceous hybrid by pyrolyzing a modified preceramic polymer incorporating vanadium acetylacetonate in a polysilsesquioxane followed by hydrofluoric acid etching. The structural and microscopic characterisation confirmed the uniform distribution of nanoparticulate vanadium carbide in the matrix. Electrochemical behaviour was analyzed in a three-electrode set-up in sodium sulfate electrolyte, which exhibited a unique combination of supercapacitive and faradaic charge storage mechanisms. The broad redox peak found around -0.4 V suggested the presence of a faradaic charge storage mechanism, whereas the current across the entire potential range indicated supercapacitive behaviour. The material exhibited a specific capacitance of 123.7 F g-1 at a scan rate of 20 mV s-1. The high point of this work is that the specific capacitance of the hybrid did not deteriorate even at a high potential scan rate of 100 mV s-1. The solution resistance (R1) and charge transfer resistance (R2) were found to be approx. 2.8 Ω and 3.1 Ω, respectively. The frequency, potential, and complex capacitance relationship with the charge storage mechanism was elucidated by the 3D graphical analysis of the Bode plot. Furthermore, a symmetric supercapacitor fabricated from the developed hybrid demonstrated robust cyclability, retaining 78% of its initial capacitance after 5000 cycles. The device achieved an energy density and power density of 254 Wh kg-1 and 58 W kg-1, respectively, with a coulombic efficiency of 95% at the end of cycling. This study demonstrates an innovative approach for the synthesis of a hybrid material from the preceramic polymer route with faradaic and supercapacitive charge storage mechanisms.
Related Concept Videos
MOS Capacitor
The metal gate is typically made from highly conductive materials such as aluminum or polysilicon. Beneath the metal gate lies a thin layer of...
Energy Stored in a Capacitor
Energy Stored in Capacitors
By integrating the equation that relates voltage and current in a capacitor, one can derive an equation for the voltage across the capacitor at any given time. This equation is crucial in understanding and predicting the behavior of capacitors in...
Energy Stored in a Capacitor: Problem Solving
Capacitor-discharge ignition is a type of ignition system commonly found in small engines where the energy released from a capacitor ignites an induction coil that, in turn, fires the spark plug.
To calculate the energy stored in a capacitor of...
Capacitor With A Dielectric
Dielectrics are non-conducting materials with no free or loosely bound electrons. When a dielectric is...
Capacitors and Capacitance
When the conductors are two identical parallel plates, it is called a parallel plate capacitor. When battery terminals are...


