High-Value Utilization of Amaranth Residue and Waste LDPE by Co-Pyrolysis

Amaranth is important for the agro-industrial complex. However, when extracting flour and oil from seeds, a lot of waste remains. Waste recycling by co-pyrolysis aims at obtaining new products with high added value. This study examined a combination of A. cruentus (AC) residues and low-density polyethylene (LDPE) waste. The addition of polymer was aimed at obtaining hydrocarbon-rich pyrolysis liquid and biochar. Pyrolysis was performed on an experimental setup, along with thermogravimetry-Fourier infrared spectroscopy-gas chromatography mass spectrometry (TG-FTIR-GC MS), to examine the thermochemical conversion. Experiments were carried out using a thermogravimetric analyzer at heating rates of 5, 10, and 20 °C/min. The average activation energy values for the pyrolysis of the AC/LDPE blend by the Ozawa-Flynn-Wall (OFW) and Kissinger-Akahira-Sunose (KAS) techniques were 301.39 kJ/mol and 287.69 kJ/mol, respectively. A visual examination of the correlations of the kinetic parameters of AC/LDPE was carried out using the Kriging method. The pyrolysis liquid from AC contains 38.14% hydrocarbons, with the main part being aliphatic hydrocarbons. During the pyrolysis of the AC/LDPE mixture, hydrocarbons were found in the resinous and waxy organic fractions of the pyrolysis liquid. The composition and properties of AC and AC/LDPE biochar are similar, and they can both be applied to agriculture.