Analysis of the Permeability Capacity and Engineering Performance of Porous Asphalt Concrete

This study investigates the permeability performance and engineering performance of porous asphalt concrete (PAC) mixtures. PAC-10 and PAC-13 mixture specimens with various porosities were prepared. The relationships among porosity, effective porosity, and effective porosity proportion were analyzed, and the pavement engineering performance was evaluated. Moreover, the effects of nominal maximum aggregate size (NMAS) and porosity characteristics on the permeability coefficient were also examined. The results indicate that both the effective porosity and the effective porosity proportion increase with total porosity for both the PAC-10 and PAC-13 mixtures. PAC-13 consistently exhibits a higher effective porosity than PAC-10, suggesting enhanced drainage performance. The designed PAC mixtures satisfy the requirements of high-temperature stability and moisture resistance for asphalt pavements, while the large porosity is contradictory with high-temperature stability and moisture resistance. Additionally, the permeability coefficient significantly increases with larger NMAS, and a strong linear correlation is observed between permeability and both total and effective porosity, where the coefficient of determination (R²) is larger than 0.9. These findings demonstrate that porosity parameters can serve as reliable indicators for assessing the permeability performance of PAC mixtures with different gradations.