Dynamic Responses of a Single-Axle Trailer When Driving Over a Road Obstacle

Trailers for passenger cars are often used for the transportation of goods. There are various trailer designs. Most trailers are equipped with axles, which include swinging arms and are suspended by rubber segments. Observations have revealed that empty trailers have unfavorable driving properties when they are driven on uneven roads, for example, the wheels could jump off the road. Such a situation is dangerous because it is not possible to transmit any contact forces (longitudinal, lateral, or vertical) between the wheel and the road. The goal of the present research was to measure acceleration generated in a single-axle trailer when driving over a road obstacle. Measurements were conducted in a non-public area to avoid the risk of accidents. Acceleration was recorded using two accelerometers placed on the single-axle trailer frame above the wheels' axle of rotation. Tests were performed using a vehicle-trailer combination at the chosen driving speeds, and the results for driving speeds of 20 and 30 km/h are presented. Wood plates with a height of 25 and 50 mm were used as an artificial road obstacle. The single-axle trailer was loaded with gravel bags weighing 0 to 300 kg. The measurements revealed that heavier trailer loads and lower driving speeds are safer for trailer operation. Furthermore, the measurements also demonstrated that the wheels were significantly more likely to jump off the road with a 0 kg load and low driving speed.