Related Experiment Video

Updated: Jan 18, 2026

Experimental Investigation of the Hierarchical Control in DC Microgrids Using a Real-time Simulator

Experimental Investigation of the Hierarchical Control in DC Microgrids Using a Real-time Simulator

Published on: February 14, 2025

Design and Implementation of an Off-Grid Smart Street Lighting System Using LoRaWAN and Hybrid Renewable Energy for

Seyfettin Vadi¹

¹Department of Electrical and Electronics Engineering, Faculty of Technology, Gazi University, Ankara 06500, Turkey.

Sensors (Basel, Switzerland)

|September 13, 2025

Abstract:

The growing demand for electricity and the urgent need to reduce environmental impact have made sustainable energy utilization a global priority. Street lighting, as a significant consumer of urban electricity, requires innovative solutions to enhance efficiency and reliability. This study presents an off-grid smart street lighting system that combines solar photovoltaic generation with battery storage and Internet of Things (IoT)-based control to ensure continuous and efficient operation. The system integrates Long Range Wide Area Network (LoRaWAN) communication technology for remote monitoring and control without internet connectivity and employs the Perturb and Observe (P&O) maximum power point tracking (MPPT) algorithm to maximize energy extraction from solar sources. Data transmission from the LoRaWAN gateway to the cloud is facilitated through the Message Queuing Telemetry Transport (MQTT) protocol, enabling real-time access and management via a graphical user interface. Experimental results demonstrate that the proposed system achieves a maximum MPPT efficiency of 97.96%, supports reliable communication over distances of up to 10 km, and successfully operates four LED streetlights, each spaced 400 m apart, across an open area of approximately 1.2 km-delivering a practical, energy-efficient, and internet-independent solution for smart urban infrastructure.

Keywords:

LoRaWAN MQTT P&O algorithm SCADA interface off-grid energy systems remote monitoring and control

More Related Videos

Author Spotlight: Enhancement of Salient Object Detection for Smart Grid Applications

Author Spotlight: Enhancement of Salient Object Detection for Smart Grid Applications

Published on: December 15, 2023

Related Concept Videos

P-N junction

P-N junction

A p-n junction is formed when p-type and n-type semiconductor materials are joined together. At the interface of the p-n junction, holes from the p-side and electrons from the n-side begin to diffuse into the opposite sides due to the concentration gradient. This diffusion of carriers leads to a region around the junction where there are no free charge carriers, known as the depletion region. The charge density within the depletion region for the n-side and p-side can be described by the...

Design Example: Sustainability in Concrete Building

Design Example: Sustainability in Concrete Building

As the construction industry moves towards more eco-friendly practices, concrete's adaptability and its ability to incorporate sustainable features make it a key material in the drive towards greener building solutions.
There are multiple approaches to achieve sustainability in a commercial concrete building. For instance, construct a concrete parking area under the building, utilizing pervious concrete paver blocks in open areas to facilitate rainwater collection through an underground...

Design Example: Alignment of a Road Line Using GIS

Design Example: Alignment of a Road Line Using GIS

The alignment of a road line using Geographic Information Systems (GIS) is a critical process in civil engineering, combining advanced technology with practical decision-making. This methodology begins with the collection of geospatial data, including information on land cover, geomorphology, drainage patterns, slope, and contour details. Such data is typically acquired through satellite imagery and GIS tools, offering a comprehensive understanding of the terrain.Once the data is gathered, it...

Transmission Line Design Considerations

Transmission Line Design Considerations

Aluminum has become the material of choice for overhead transmission lines, surpassing copper due to its abundance and cost-effectiveness. The most prevalent type is the aluminum conductor, steel-reinforced (ACSR), which combines aluminum strands around a steel core. Other variants include all-aluminum conductors (AAC), all-aluminum alloy conductors (AAAC), aluminum conductor alloy-reinforced (ACAR), and aluminum-clad steel conductors. Advanced designs, such as aluminum conductors with steel...

Electrical Energy

Electrical Energy

Using electric appliances for a longer period of time consumes more electrical energy and results in a higher electric bill. The energy produced by the transfer of electrons from one point to another is known as electrical energy. If power is delivered at a constant rate, the electrical energy can be defined as the product of power used by the device for a period of time. The energy unit on electric bills is the kilowatt-hour, where one kilowatt-hour is equivalent to 3.6 × 106 joules.

Electrical Systems

Electrical Systems

In electrical engineering, the analysis of networks composed of passive linear components — resistors (R), capacitors (C), and inductors (L) — is fundamental. These components are organized into circuits where the relationship between input and output can be analyzed using transfer functions. The transfer function of an RLC circuit, which relates the voltage across a capacitor to the input voltage, can be derived using Kirchhoff's laws.
To derive the transfer function, consider an RLC...

Articles linked to this work by shared authors, journal, and citation graph.

Control System Design and Implementation of Battery-Assisted Quasi-Impedance-Source Inverter for Standalone Power Generation.

Sensors (Basel, Switzerland)·2026

See all related articles