Related Experiment Video
Updated: Jan 17, 2026

Determining Viral Disinfection Efficacy of Hot Water Laundering
Published on: June 21, 2022
Evaluating the effectiveness of a novel environmental decontamination system utilizing low-energy hyper-charged
Madeeha Afzal1, Mark D P Willcox2, Stephan Praet3
1School of Optometry and Vision Science, University of New South Wales, Kensington, NSW, Australia; Kirby Institute University of New South Wales, Kensington, NSW, Australia.
Abstract:
The COVID-19 pandemic had profound economic and social effects across the globe. The present study evaluated the virus attenuation efficacy of an environmental decontamination system named photon-mediated electron emitter (PMEE) on aerosolized and surface-associated coronavirus. The intensity of hyper-charged photoelectrons emitted by the PMEE were measured over distances of 1-5 m using a photon-detection mapping device. The antiviral efficacy of the PMEE was tested against mouse hepatitis virus (MHV-1) ATCC/VR261. For aerosolised studies, the MHV-1 was aerosolized using an electronic diffuser in an enclosed booth. Virus particles were exposed to PMEE for 10 and 15 min. For surface studies, viruses were dried on steel and laminate surfaces and then exposed to the PMEE from distances of 1 and 5-meters. The antiviral potential of the PMEE was evaluated by culturing MHV-1 in A9 ATCC/CCL 1.4 cells using a plaque assay. PMEE emission strength ranged from 1.44 to 1.86 V inside the booth and 0.83-1.86 V outside. The average size of the generated aerosol particles was 3.0 ± 0.3 µm. After 10 min exposure, the virucidal effects against particles of 2.1 µm, 1.1 µm, and 0.65 µm pore sizes were 74.5 ± 11.1 %, 79 ± 4.9 %, and 96 ± 1.4 % respectively. On surfaces, a 1-minute exposure at 1 m resulted in a 60 ± 0.5 % reduction on steel and 43 ± 2.7 % on laminate. The PMEE-based system effectively reduced the infectivity of MHV-1 both in aerosols and on surfaces, demonstrating strong potential for environmental decontamination applications.
More Related Videos
Related Concept Videos
Physical Methods for Controlling Microbial Growth: Radiation and Filtration
Chemical Agents for Microbial Control
Cleaning, Sterilization, and Disinfection
Cleaning
The cleaning process usually involves using water with detergents or enzymatic cleaner and removing foreign material from objects and surfaces, including organic material such as body fluids or inorganic material like soil. Cleaning is performed before high-level disinfection and sterilization because foreign materials on the cover of the devices interfere with process...
Antimicrobial Effectiveness
Methods of Sterilization II: Chemical Methods
Using chemical sterilization rather than heat to clean out equipment is recommended. It eradicates and removes all bacteria,...
Methods of Sterilization I: Physical Methods
Steam sterilization uses non-toxic, low-cost moist heat in the form of saturated steam under pressure, which is fast, microbicidal, and sporicidal, and quickly warms and penetrates fabrics. Autoclaves, or steam sterilizers, expose each item to direct steam contact for a predetermined time at the necessary...

