Related Experiment Video
Updated: Jan 6, 2026

Interactive and Visualized Online Experimentation System for Engineering Education and Research
Published on: November 24, 2021
Composite Anti-Disturbance Control for Networked Systems With Disturbances and Actuator Attacks via Event-Triggered
Abstract:
This article investigates the issue of composite anti-disturbance and attack control for networked systems under unknown actuator attacks and external disturbances. First, a double-ended event-triggering mechanism is designed to reduce unnecessary data transmission in the feedforward and feedback channels. Second, an augmented observer is designed to estimate the system states and disturbances. The intermittent estimation signal is then used to compensate for external disturbances through a novel trigger sampling mechanism. Third, the fuzzy logic system is used to approximate the unknown attack signal, and an adaptive output feedback controller is employed to mitigate its impact on the system. Based on these three key techniques, a novel functional dependent on the sampling instants is constructed to analyze semi-global uniform ultimate boundedness of the closed-loop system and obtain the criterion condition of low conservatism. Additionally, the event-triggering matrix and gains are explicitly solved by matrix transformation. Finally, the feasibility and effectiveness of the proposed method are validated via a visual servo control system and a third-order system.
More Related Videos
06:45Design and Application of a Fault Detection Method Based on Adaptive Filters and Rotational Speed Estimation for an Electro-Hydrostatic Actuator
Published on: October 28, 2022
11:44Real-Time DC-dynamic Biasing Method for Switching Time Improvement in Severely Underdamped Fringing-field Electrostatic MEMS Actuators
Published on: August 15, 2014
Related Concept Videos
Feedback control systems
Linear feedback systems are theoretical models that simplify analysis and design. These systems operate under the principle that their output is directly proportional to their input within certain ranges. For instance, an amplifier in a control system behaves linearly as long as the input signal remains within a specific range. However, most physical systems exhibit inherent nonlinearity...
Control Systems
At the heart...
Effects of feedback
Feedback significantly modifies the gain of a control system. The gain of a system without feedback is altered by a factor of one plus GH, where G represents...
Time-Domain Interpretation of PD Control
Consider the example of control of motor torque. Initially, a positive...
Open and closed-loop control systems
An open-loop control system operates without feedback from the output. It consists of two primary elements: the controller and the controlled process. The controller receives an input signal...
Root Loci for Positive-Feedback Systems
The construction rules for the root locus in positive feedback systems are similar to those in...