Related Experiment Video
Updated: Jan 16, 2026

Automated Deployment of an Internet Protocol Telephony Service on Unmanned Aerial Vehicles Using Network Functions Virtualization
Published on: November 26, 2019
Performance Analysis of Non-Orthogonal Multiple Access-Enhanced Autonomous Aerial Vehicle-Assisted Internet of
Zheming Zhang1, Yixin He1,2, Yifan Lei1
1College of Information Science and Engineering, Jiaxing University, Jiaxing 314001, China.
Abstract:
The increasing number of intelligent connected vehicles (ICVs) is leading to a growing scarcity of spectrum resources for the Internet of Vehicles (IoV), which has created an urgent need for the use of full-duplex non-orthogonal multiple access (FD-NOMA) techniques in vehicle-to-everything (V2X) communications. Meanwhile, for the flexibility of autonomous aerial vehicles (AAVs), V2X communications assisted by AAVs are regarded as a potential solution to achieve reliable communication between ICVs. However, if the integration of FD-NOMA and AAVs can satisfy the requirements of V2X communications, then quickly and accurately analyzing the total achievable rate becomes a challenge. Motivated by the above, an accurate analytical expression for the total achievable rate over Rician fading channels is proposed to evaluate the transmission performance of NOMA-enhanced AAV-assisted IoV with imperfect channel state information (CSI). Then, we derive an approximate expression with the truncated error, based on which the closed-form expression for the approximate error is theoretically provided. Finally, the simulation results demonstrate the accuracy of the obtained approximate results, where the maximum approximate error does not exceed 0.5%. Moreover, the use of the FD-NOMA technique in AAV-assisted IoV can significantly improve the total achievable rate compared to existing work. Furthermore, the influence of key network parameters (e.g., the speed and Rician factor) on achievable rate is thoroughly discussed.
Related Concept Videos
Receiver Operating Characteristic Plot
Maximum Power Transfer
By substituting the entire circuit with...
Relative Motion Analysis using Rotating Axes - Acceleration
Time differentiation is...
Linear time-invariant Systems
The input-output behavior of an LTI system can be fully defined by its response to an impulsive excitation at its input. Once this impulse response is known, the system's reaction to any other input can be...
Doppler Effect - II
Relative Motion Analysis - Velocity
When an external force is exerted, it sets the crank into a rotational movement. This, in turn, instigates the motion of the connecting rod, leading to what is referred to as a general plane motion. This process involves two key points - point A on the connecting rod...

