Related Experiment Video
Updated: Jan 16, 2026

Preparation and High-temperature Anti-adhesion Behavior of a Slippery Surface on Stainless Steel
Published on: March 29, 2018
Low friction layer in sanitary products for reduced skin irritation
Toshiaki Nishi1, Kenta Matsui2, Rina Ito3
1Graduate School of Engineering, Tohoku University, 6-6-01, Aoba, Aramaki-Aza, Aoba-Ku, Senda, Miyagi, 980-8579, Japan. toshiaki.nishi.b3@tohoku.ac.jp.
Abstract:
Sanitary napkins are essential during menstruation, but they can sometimes cause skin irritation due to friction. In this study, we propose a novel design: introducing a low-friction layer within the bulk of a sanitary napkin. Friction tests were conducted between an artificial skin block and sanitary napkin specimens with and without a low-friction layer. The strain distribution on the lateral side of the artificial skin block was experimentally measured. The friction coefficient and strain decreased when the low-friction layer was applied under loads greater than 1.96 N. The strain increased with normal load. Because lower strain on the skin correlates with reduced skin irritation, the use of a low-friction layer in sanitary napkins is expected to reduce skin irritation, particularly under high contact pressure.
More Related Videos
Related Concept Videos
Surface Membrane Barriers
The outer layer of the skin, the epidermis, is a robust barrier comprising layers of closely packed keratinized cells. This dense arrangement prevents microbes from penetrating the body. The periodic shedding of epidermal cells...
Characteristics of Dry Friction
Before the wheelbarrow starts moving, the static frictional force acts tangentially to the contact surface, opposing the force that is about to induce the motion. This frictional force prevents the...
Dry Friction
To illustrate this concept, imagine a wooden crate resting on a rough, non-uniform horizontal surface. When an external force is applied to...
Tissue Membranes
Connective Tissue Membranes
The connective tissue membrane is formed solely from connective tissue. These membranes encapsulate organs, such as the kidneys, and line our movable joints. A synovial...
Vagina
Design Example: Deciding Thickness of Lubricating Fluid in a Shaft
To calculate the required thickness of the lubricant layer, the tangential velocity at the shaft's surface must first be determined. This velocity is calculated by converting the rotational speed to angular velocity...

