Related Experiment Video
Updated: Jan 15, 2026

Fabrication of Schottky Diodes on Zn-polar BeMgZnO/ZnO Heterostructure Grown by Plasma-assisted Molecular Beam Epitaxy
Published on: October 23, 2018
Breaking the p-type doping barrier in β-Ga2O3: a GaN-based heterojunction bipolar transistor with high gain, high
Phuc Hong Than1, Tho Quang Than2, Yasushi Takaki3
1Duy Tan University (DTU) 3 Quang Trung, Hai Chau Danang 550000 Vietnam thanhongphuc@duytan.edu.vn.
Abstract:
Despite extensive research on unipolar β-Ga2O3 semiconductor devices, the advancement of bipolar devices, particularly heterojunction bipolar transistors (HBTs), has been significantly hindered by the lack of reliable p-type doping in β-Ga2O3. In this paper, we present the first comprehensive simulation study of a functional HBT based on an n-type β-Ga2O3 emitter, a p-type GaN base, and an n-type GaN collector, aiming to address the critical challenge of p-type doping in β-Ga2O3 for bipolar devices. The proposed Ga2O3/GaN HBT, simulated with full consideration of traps, exhibits a maximum DC current gain (β DC) of 18.3, a high collector current density (J C) of 14.3 kA cm-2, a collector-base breakdown voltage (BVCBO) of 120 V, a power figure of merit (PFOM) of 41.3 MW cm-2, and a low specific on-resistance (R on,sp) of 0.35 mΩ cm2. The temperature-dependent current-voltage (I-V) characteristics from 300 K to 460 K reveal stable operation up to 460 K, albeit with a 31.1% reduction in β DC and a 30.0% decline in PFOM due to carrier mobility degradation and enhanced recombination. Furthermore, device performance was optimized by engineering the base and collector thicknesses. The results indicate that a thin base (0.05 μm) maximizes β DC, while a thick collector (2.0 μm) boosts PFOM to 138 MW cm-2 without compromising gain. In addition, high-frequency simulations show a cutoff frequency (f T) of 30 GHz at 300 K, confirming the device's suitability for RF and power-switching applications. These results indicate that the Ga2O3/GaN HBT is a promising candidate for next-generation power electronics, owing to its unique combination of high breakdown voltage and excellent frequency performance.
Related Concept Videos
Bipolar Junction Transistor
Biasing of P-N Junction
In equilibrium, no external voltage is applied across the p-n junction. The depletion region is formed at the junction interface due to the diffusion of carriers, which leaves behind charged dopants, acceptors on the p-side, and donors on the n-side. These immobile charges create an electric field that prevents further diffusion of carriers. The related energy band...
Diode: Reverse bias
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no...
Biasing of Metal-Semiconductor Junctions
In Schottky junctions, where the semiconductor is n-type, applying a positive voltage to the metal relative to the semiconductor reduces its Fermi...
Working Principle of BJT
In the PNP configuration, the emitter is heavily doped with positive charge carriers (holes), while the base is lightly doped with negative carriers (electrons). This setup allows for a forward bias across the emitter-base junction,...

