Related Experiment Video
Updated: Jan 15, 2026

Towards Biomimicking Wood: Fabricated Free-standing Films of Nanocellulose, Lignin, and a Synthetic Polycation
Published on: June 17, 2014
Viscous Rheological Behavior of Nanosuspensions of Fumed Silica Nanoparticles and Cellulose Nanocrystals
Rajinder Pal1, Hanie Alizadeh1
1Department of Chemical Engineering, University of Waterloo, Waterloo, ON N2L 3G1, Canada.
Abstract:
The viscous rheological behavior of suspensions of mixtures of fumed silica nanoparticles (N20) and rod-shaped cellulose nanocrystals (NCC) were studied experimentally. The fumed silica concentration varied from 2 to 11.3 wt% and the NCC concentration varied from 0.99 to 6.73 wt%. The suspensions of pure fumed silica, pure NCC, and mixtures of N20 and NCC were non-Newtonian shear-thinning in nature. The viscosity versus shear rate data of all suspensions of pure and mixed additives could be described satisfactorily by a power-law model. The consistency and flow behavior indices of the suspensions were strongly dependent on the concentrations of both N20 and NCC. While the consistency index increased sharply with the increases in additive (N20 and NCC) concentrations, the flow behavior index generally decreased with the increases in N20 and NCC concentrations. Thus, the suspensions became more shear-thinning with the increases in N20 and NCC concentrations. The shear-thinning of suspensions was due to two different mechanisms: the orientation of rod-shaped cellulose nanocrystals in the flow direction with the increase in shear rate and the break-up of large agglomerates of fumed silica aggregates with the increase in shear rate.
More Related Videos
08:42Challenges in Rheological Characterization of Highly Concentrated Suspensions — A Case Study for Screen-printing Silver Pastes
Published on: April 10, 2017
11:32Highly Stable, Functional Hairy Nanoparticles and Biopolymers from Wood Fibers: Towards Sustainable Nanotechnology
Published on: July 20, 2016
Related Concept Videos
Colloids and Suspensions
Colloids
Factors Affecting Dissolution: Particle Size and Effective Surface Area