Recent Advances in Nano-Engineered Thermochemical Energy Storage Materials: Morphologies, Characteristics, and...

Thermochemical energy storage (TCES) has gained significant attention as a high-capacity, long-duration solution for renewable energy integration, yet material-level challenges hinder its widespread adoption. This review for the first time systematically examines recent advancements in nano-engineered composite thermochemical materials (TCMs), focusing on their ability to overcome intrinsic limitations of conventional systems. Sorption-based TCMs, especially salt hydrates, benefit from nano-engineering through carbon-based additives like CNTs and graphene, which enhance thermal conductivity and reaction kinetics while achieving volumetric energy densities exceeding 200 kWh/m³. For reversible reaction-based systems operating at higher temperatures (250-1000 °C), the strategies include (1) nanoparticle doping (e.g., SiO₂, Al₂O₃, carbonaceous materials) for the mitigation of sintering and agglomeration; (2) flow-improving agents to enhance fluidization; and (3) nanosized structure engineering for an enlarged specific surface area. All these approaches show promising results to address the critical issues of sintering and agglomeration, slow kinetics, and poor cyclic stability for reversible reaction-based TCMs. While laboratory results are promising, challenges still persist in side reactions, scalability, cost reduction, and system integration. In general, while nano-engineered thermochemical materials (TCMs) demonstrate transformative potential for performance enhancement, significant research and development efforts remain imperative to bridge the gap between laboratory-scale achievements and industrial implementation.