Related Experiment Video
Updated: Jan 12, 2026

Large Scale Energy Efficient Sensor Network Routing Using a Quantum Processor Unit
Published on: September 8, 2023
Network reconfiguration and DG based compensation of Wolaita Sodo distribution system by using particle swarm
Biniam Alemayehu1, Satyasis Mishra2, Ghanshyam G Tejani3,4
1Department of Electrical and computer engineering, University of Wolaita Sodo, Sodo, Ethiopia.
Abstract:
Improving voltage profiles and reducing power losses are critical challenges in modern distribution systems, especially in real, unbalanced and weakly interconnected grids. This study presents a novel application of simultaneous network reconfiguration and distributed generation (DG) placement using Particle Swarm Optimization (PSO) to the Wolaita Sodo distribution network in Ethiopia. Unlike most prior works conducted on IEEE standard feeders, this research uses actual network topology, load data, conductor parameters and operational constraints from a real Ethiopian distribution system. The optimization problem considers radiality constraints, DG size limits and voltage and current limits, with objectives of minimizing active/reactive power losses, improving voltage profiles and maximizing economic benefits. A backward-forward sweep load flow method evaluates network performance under four scenarios: base case, reconfiguration only, DG placement only and simultaneous implementation. Results show that the proposed method reduces active power losses by 72.064%, decreases voltage deviation from 24.63% to 4.5% and improves the minimum bus voltage from 0.7537 pu to 0.9550 pu. The annual financial savings of 16.3956 million ETB yield a payback period of six years. This grouping of real-network data, simultaneous optimization, and integrated techno-economic analysis offers a practical and replicable decision-support tool for utilities in emerging power systems.
Related Concept Videos
Distributed Loads: Problem Solving
Fast Decoupled and DC Powerflow
Power System Distribution
The transmission system is designed...
Maximum Power Flow and Line Loadability
Distributed Loads
For example, consider a bookshelf filled with books stacked vertically adjacent to each other. The weight of the books is evenly distributed over the length of the shelf. As a result, the pressure at different locations on the surface of the...
Distribution Reliability and Automation
