Effects of Magnetite Powder on Microwave Heating Properties and Pavement Performance of Asphalt Mixture

Microwave heating is a method with a uniform heating effect and environmental friendliness in in-place hot recycling, but the microwave absorption capacity of traditional asphalt mixtures is still insufficient. As an excellent microwave-absorbing material, magnetite powder has the characteristics of high temperature resistance, corrosion resistance, and good thermodynamic stability. This study selects it as the microwave-absorbing material, prepares AC (Asphalt Concrete) type and SMA (Stone Mastic Asphalt) type microwave asphalt mixtures by adjusting its content, and investigates its influence on the microwave-heating characteristics and pavement performance of the mixtures. Simulations of the microwave-heating process of AC-type mixtures using COMSOL software (COMSOL Multiphysics 6.2) show that magnetite powder achieves optimal performance in terms of heating effect and economic efficiency when its content is 0.5%. Subsequently, laboratory tests are conducted to study the wave absorption and temperature rise performance of AC and SMA microwave asphalt mixtures; combined with economic factors, the optimal contents of magnetite powder for the two types of mixtures are determined to be 0.5% and 1%, respectively, and at the same time, these results are explained based on multiple physical theories. Furthermore, pavement performance is investigated through laboratory tests, including high-temperature rutting tests, low-temperature bending tests, immersed Marshall tests, and freeze-thaw cycle durability tests, and the results indicate that the high-temperature performance, low-temperature performance, and water stability of the microwave asphalt mixtures all meet the specification requirements for pavement performance. Subsequently, after 15 freeze-thaw cycles, the splitting tensile strength retention rate and stiffness modulus of the two types of mixtures show minimal differences from those of ordinary mixtures, and there is no durability degradation caused by the incorporation of magnetite powder. Finally, outdoor environment verification is carried out, and the results show that under complex conditions such as environmental factors, the wave absorption and temperature rise rates of AC and SMA mixtures at optimal contents are 52.2% and 14.6% higher than those of ordinary AC and SMA asphalt mixtures, respectively. In addition, these microwave asphalt mixtures have the advantages of both sustainability and reduced carbon emissions. By combining simulation methods and experimental verification, this study finally prepared two types of microwave asphalt mixtures with excellent performance, not only improving the microwave absorption and heating performance of asphalt mixtures, but also reducing environmental pollution and energy consumption, which conforms to the development of green transportation.