Evaluation of the Mechanical Stability of Optical Payloads for Remote Sensing Satellites Based on Analysis and...

This paper presents the results of numerical modeling and vibration testing of a nanosatellite's optical payload, aimed at assessing its mechanical stability under the mechanical impacts of launch. The purpose of the study is to compare finite element modeling (FEM) data with experimental testing to refine the computational model and improve the reliability of mechanical stability predictions. The methodology included an FEM analysis with an average damping coefficient, an adapter blank test, a resonance study with a low-level sinusoidal run, random vibration tests, and a sinusoidal pulse test. The FEM results showed an average yield margin of safety MoS = 2.5 with a minimum MoS = 1.8 in the primary mirror mount area. The adapter blank test confirmed the absence of natural resonances in the operating range. The resonance study revealed modes in the 300-1340 Hz range, with the most pronounced peaks in the secondary mirror bracket (520-600 Hz) and the electronics unit (1030-1100 Hz). A comparison of the root mean square (RMS) acceleration values between calculations and tests revealed discrepancies due to the heterogeneous nature of the damping. The values of ζ determined by the half-power method varied from 0.9% to 4.8%, which confirms the dependence of the damping properties on the frequency and localization of the modes. The obtained results confirmed the structural integrity of the payload, allowed for the localization of structural elements, and substantiated the need to consider actual damping coefficients in FEM models. The presented data can be used to optimize the design and improve mechanical stability during payload integration into the satellite platform.