Characterization of a simple potentiometric graphite based sensor and its effective applicability in sensitive and...

The importance of Cu(II) in environmental, biological, and industrial systems makes it crucial to develop a highly selective and sensitive analytical methodology for its determination. Herein, a graphitic based sensor modified with a Schiff base, namely 2-(((3-aminophenyl) imino) methyl) phenol was developed and applied. A broad concentration range (1 × 10^-7- 1 × 10^-1) mol L^-1 was covered by the electrode's linear response to Cu(II), which had a 29.571 ± 0.8 mV decade^-1 Nernstian slope. It was highly reproducible (inter and intraday RSDs%=0.94-2.12), with a response time of approximately 15 s and pH working rang was from 3.5 to 6.5. and had a two-month lifespan. With this modified sensor, 5.0 × 10^-8 mol L^-1 was the detection limit and1.65 × 10^-7 mol L^-1 was the limit of quantification. Over a wide range of metal ions, the suggested electrode exhibited very good selectivity for Cu(II) applying separate solution method(SSM), fixed interference method (FIM) and matched potential method (MPM). Cu(II) levels in Several samples like spiked water samples, Hairvogine multivitamin and Nutrifol vegetable foliar were accurately determined potentiometrically by either direct, or standard addition methods using this chemically altered carbon paste electrode giving a comparable results with atomic absorption spectroscopy (AAS) technique. Scanning electron microscope (SEM) combined with energy dispersive X-ray (EDX) were utilized for morphological analysis of sensors' reactive surface combined with elemental analysis as well.