Related Experiment Video
Updated: Jan 10, 2026

Fabrication of Schottky Diodes on Zn-polar BeMgZnO/ZnO Heterostructure Grown by Plasma-assisted Molecular Beam Epitaxy
Published on: October 23, 2018
Investigation of Electrical Behavior of Au/Ti/AlN/Si Schottky Diode via Gaussian Distribution Barrier Modeling
Abdullah Karaca1, Dilber Esra Yıldız2,3, Adem Tataroğlu4
1Department of Physics, Faculty of Arts and Sciences, Yozgat Bozok University, 66100 Yozgat, Turkey.
Abstract:
This study presents a comprehensive analysis of the temperature-dependent electrical behavior of Au/Ti/AlN/n-Si Schottky diode using both experimental measurements and theoretical modeling. The key diode parameters, namely the ideality factor (n) and the zero-bias barrier height (ϕ B0) were extracted over the temperature range of 100-400 K and were found to exhibit a strong dependence on temperature. The experimental results revealed that "ϕ B0" increases and "n" decreases with rising temperature, consistent with the presence of a Gaussian distribution of barrier heights and a transition toward thermionic emission-dominated transport. A theoretical model incorporating barrier inhomogeneities was employed and yielding results in close agreement with experimental trends, particularly for ϕ B0. Modified Richardson plots confirmed the validity of the Gaussian distribution model, allowing for accurate determination of the average barrier height and Richardson constant. While the theoretical predictions matched the experimental behavior well at high temperatures, deviations at lower temperatures showed the influence of interface states and nonideal effects. The observed behavior indicates that the charge transport mechanism is influenced by spatial variations in the potential barrier, particularly at lower temperatures.
More Related Videos
10:31Plasma-assisted Molecular Beam Epitaxy of N-polar InAlN-barrier High-electron-mobility Transistors
Published on: November 24, 2016
06:57Theoretical Calculation and Experimental Verification for Dislocation Reduction in Germanium Epitaxial Layers with Semicylindrical Voids on Silicon
Published on: July 17, 2020
Related Concept Videos
Schottky Barrier Diode
Metal-Semiconductor Junctions
Schottky Barriers
Schottky barriers arise when a metal with a work function (Φm) contacts a semiconductor with a different work function (Φs). Initially, electrons transfer until the Fermi levels of the metal and semiconductor align at equilibrium. For instance, if Φm > Φs, the semiconductor Fermi level is higher than the metal's before contact. The...
Modeling of Diode Reverse Characteristics
When a reverse voltage applied to a Zener diode exceeds its breakdown voltage, the diode enters the breakdown region. At this point, the...
Modeling of Diode Forward Characteristics
Small-signal Diode Model
Biasing of Metal-Semiconductor Junctions
In Schottky junctions, where the semiconductor is n-type, applying a positive voltage to the metal relative to the semiconductor reduces its Fermi...