Microstructure Evolution and Mechanical Properties of Fe-25Ni-15Cr Alloy During Cumulative Cold-Drawing Deformation...

In this study, we fabricated Fe-25Ni-15Cr alloy rods via vacuum induction melting, electroslag remelting, forging, hot rolling, and annealing. We systemically investigated the influence of varying cold-drawing deformation levels (10-60%) on microstructure evolution and mechanical properties, which were characterized by a variety of multi-scale characterization techniques, including optical microscopy, scanning electron microscopy, X-ray diffraction, and transmission electron microscopy. The results show that when the cumulative deformation amount is less than 30%, the hardness, tensile strength, and yield strength increase significantly with the increase in deformation amount, while the elongation continues to decline; when the cumulative deformation amount exceeds 30%, the rates of increase in hardness and strength decrease significantly; and when the deformation amount increases to 50%, dislocation density accumulates preferentially at the grain boundaries and forms a cellular substructure, while the texture orientation gradually stabilizes from random distribution to the <111> direction. This alloy rod exhibits three strengthening mechanisms during cold drawing: grain refinement, second-phase precipitation, and work hardening. A predictive model for tensile strength is derived through theoretical calculations. This work has guiding significance for establishing a cold-drawing process window without intermediate annealing.