Adsorbents Made from Cotton Textile Waste-Application to the Removal of Tetracycline in Water

The adsorptive removal of tetracycline (TC) in aqueous solution, a widely used antibiotic, was investigated using activated carbon derived from cotton textile waste. The valorization of textile waste provides a sustainable strategy that not only reduces the growing accumulation of discarded textiles but also supports a circular economy by transforming waste into efficient adsorbent materials for the removal pharmaceutical contaminants. This dual environmental and economic benefit underscores the novelty and significance of using cotton-based activated carbons in wastewater treatment. In this study, cotton textile waste was utilized as a raw material for the preparation of adsorbents via pyrolysis under nitrogen at 600 °C followed by chemical modification with H₂SO₄ solutions (1, 2, and 3 M). The sulfuric-acid modified-carbons (SMCs) were characterized by BET surface area analysis, FTIR spectroscopy and SEM imaging. Batch adsorption experiments were carried out to evaluate the effects of key operational parameters including contact time, initial TC concentration and solution pH. The results showed that the material treated with 2 M H₂SO₄ displayed the highest adsorption performance, with a specific surface area of 700 m²/g and a pore volume of 0.352 m³/g. The pH has a great influence on TC adsorption; the adsorbed amount increases with the initial TC concentration from 5 to 100 mg/L and the maximum adsorption capacity (74.02 mg/g) is obtained at pH = 3.8. The adsorption behavior was best described by Freundlich isotherm and pseudo-second-order kinetic models. This study demonstrates that low-cost and abundantly available material, such as cotton textile waste, can be effectively repurposed effective adsorbents for the removal of pharmaceutical pollutants from aqueous media.