Related Experiment Video
Updated: Jan 10, 2026

Characterizing Dissipative Elastic Metamaterials Produced by Additive Manufacturing
Published on: June 28, 2024
Dynamic Compressive Behavior of Graded Auxetic Lattice Metamaterials: A Combined Theoretical and Numerical Study
Zeyao Chen1, Jinjie Liu1, Xinhao Li1
1School of Electro-Mechanical Engineering, Guangdong University of Technology, Guangzhou 510006, China.
Abstract:
Auxetic metamaterials, characterized by negative Poisson's ratio, have garnered significant interest due to their exceptional impact resistance. This study presents a type of auxetic metamaterial organized in re-entrant arrowhead lattices. The uniaxial impact behavior of a uniform auxetic lattice was first investigated through experiment and finite element simulation, which showed good agreement. Subsequently, two graded auxetic lattices with density-gradient profiles were proposed by varying the radius of the bars in the basic auxetic lattice. Numerical simulations demonstrate that, across various compression velocities, both graded architectures achieve higher plateau stresses and enhanced energy absorption compared to their uniform counterpart. Notably, the graded lattice with lower density at the impact end exhibited a reduced initial peak stress. An analytical framework was also established to characterize the compressive behavior of these auxetic lattices. Theoretical analyses elucidate the underlying mechanisms of impact energy dissipation and provide a solid basis for predicting dynamic compressive performance. Furthermore, a gradient-parametric study revealed that the stress-strain response is significantly influenced by both the density gradient and impact velocity, further demonstrating a high consistency between the theoretical predictions and the simulation results. This research is desirable to provide insights for designing graded auxetic metamaterials with tailored impact properties.
Related Concept Videos
Relation between Poisson's ratio, Modulus of Elasticity and Modulus of Rigidity
Dynamic Modulus of Elasticity of Concrete
The sonic test is a common method to determine the dynamic modulus. In this test, a concrete beam, sized either 6 x 6 x 30 inches or 4 x 4 x 20 inches, is clamped at its center. Vibrations are initiated at one end of the beam by an electromagnetic exciter unit powered by a...
Bending of Members Made of Several Materials
Hooke's Law determines stress in each material, stating that stress is proportional to strain but varies due to each material's...
Behavior of Concrete Under Compressive Load
As the concrete specimen fractures under...
Trends in Lattice Energy: Ion Size and Charge
Generalized Hooke's Law

