Assessment of the Stability of Propellants Modified with Eco-Friendly Plasticizers

The growing importance of sustainable technologies and environmental safety is promoting the implementation of green chemistry principles in the field of energetic materials. Traditionally, nitrocellulose-based propellants are plasticized with dibutyl phthalate (DBP), which is classified as a hazardous substance due to its toxicity and migration during storage. In this work, triethyl 2-acetylcitrate (ATEC) and tributyl 2-acetylcitrate (ATBC) were investigated as biodegradable and non-toxic alternatives to DBP. The objective of this study was to evaluate the thermal and chemical stability, physicochemical properties, and incorporation efficiency of these eco-friendly plasticizers in regard to propellants prepared from nitrocellulose of different origins and with nitrogen contents. The stability of the obtained propellants was assessed based on accelerated aging tests conducted in accordance with NATO STANAG 4582 and AOP-48 procedures. The results showed that both the ATEC- and ATBC-modified propellants meet the stability requirements corresponding to at least ten years of storage at 25 °C. The modified propellants showed slightly lower heats of combustion. Both plasticizers were effectively integrated into the nitrocellulose matrix without compromising density or stability. This study confirms that citric-acid-based plasticizers are promising green alternatives to conventional phthalates, offering improved environmental compatibility while maintaining the required performance and safety of nitrocellulose propellants.