Fundamental insights into gallium leaching for sustainable electronic waste recovery
Aylin Nur Erkmen1, Roland Ulber2, Thomas Jüstel3
1The Department of Chemical Engineering, FH Münster University of Applied Sciences, Steinfurt, 48565, Germany. aylin.erkmen@fh-muenster.de.
Abstract:
This study systematically concerns the leaching behavior and dissolution kinetics of gallium (Ga). The objective was to identify sustainable leaching agents by incorporating organic acid reagents. Using a novel approach involving pH-adjusted experiments, the findings elucidated the dissolution behavior, delineating acidolysis and complexolysis. The screening results demonstrated the efficacy of oxalic acid (10 mM), which extracted 1105.2 ± 61.4 mg/L of Ga at pH 1.2. Dissolution kinetics based on the shrinking core model (SCM) revealed a synergistic mechanism governed by film diffusion and surface chemical reaction control, with chemical reaction control dominating at higher temperatures. One-factor-at-a-time (OFAT) experiments clarified the influence of experimental parameters on Ga leaching yield. In addition, the Box-Behnken design (BBD) was employed to evaluate parameter interactions, confirming the significance of the process parameters, including interaction terms, while characterizing the model in terms of a quadratic expression. Under optimized conditions: 710.55 mM acid concentration, a reaction temperature of [Formula: see text]C, and a solid loading of 50 g/L, 37% of Ga was effectively extracted within 3.2 hours. These findings underscore the selectivity and operational compatibility of oxalic acid compared to conventional leaching agents, emphasizing its promising integration into biogenic production pathways and sustainable closed-loop gallium recovery processes.
Related Concept Videos
Electrogravimetric Analysis: Overview
To test the completeness of the...
Extraction: Advanced Methods
Voltammetry: Stripping Methods
Anodic Stripping Voltammetry (ASV)
ASV is used to determine metals and metalloids at trace levels. It involves two steps: deposition and stripping. First, a negative potential is applied to the...
Voltaic/Galvanic Cells
Spontaneous redox reactions occur abundantly in nature. The chemical reaction occurring in a disposable AA battery powering our remote controls is one such example of a spontaneous redox reaction. Another example is the immersion of coiled copper wire into an aqueous silver nitrate solution. The reaction shows a gradual, visually impressive color change from colorless to bright blue and the formation of a grey precipitate on the copper wire. In this experiment,...
Electrodeposition
Electrodeposition can...


