Related Experiment Video
Updated: Jan 9, 2026

Towards Biomimicking Wood: Fabricated Free-standing Films of Nanocellulose, Lignin, and a Synthetic Polycation
Published on: June 17, 2014
Sustainable Cellulose- and Pectin-Rich Triboelectric Nanogenerator for Mechanical Energy Harvesting and Self-Powered
Seongwan Kim1, Farhan Akhtar1, Shahzad Iqbal1
1Department of Electronic Engineering, Faculty of Applied Energy System, Jeju National University, Jeju 63243, Republic of Korea.
Abstract:
This study develops a high-performance triboelectric nanogenerator (TENG) through Citrullus lanatus rind powder (CLP) which originates from watermelon waste to generate sustainable power and detect humidity. The SEM and FTIR results showed that CLP contains a natural porous structure and multiple polar functional groups which improve both the charge transfer and retention capabilities. The CLP-TENG device operated in vertical contact-separation mode with PTFE as the counter layer to generate a 255 V open-circuit voltage and 30 µA short-circuit current and 35 µW peak power output at 4 Hz and 20 MΩ load. The device successfully charged a 4.7 µF capacitor to 5 V during a 80 s period and operated low-power electronic devices to prove its ability as a sustainable power source. The device output increased with increasing operating frequency while showing operation stability throughout more than 1000 cycles and seven days of continuous operation. The device demonstrated a strong humidity detection ability through its voltage response which decreased from 250 V to 120 V when the relative humidity rose from 30% to 90%. The research proves that agricultural waste can be transformed into environmentally friendly materials which perform well in green energy systems and environmental monitoring applications.

