Preparation of Electrode Coke and Determination of Its Physico-Chemical Properties

The physico-chemical and electrophysical properties of carbon coke obtained by coking composite mixtures of pitches isolated from coal tar coking plants of JSC "Shubarkol Komir" and "Qarmet" are investigated. The component composition of the initial resins and the obtained pitches was determined by gas-liquid chromatography methods. The purpose of this study was to identify the patterns of influence of the composition of composite mixtures of pitches isolated from coal tar coking plants of JSC "Shubarkol Komir" and "Qarmet", as well as heat treatment parameters (temperature 800-1000 °C, duration 4-6 h), on the thermophysical and electrophysical properties of electrode coke, with the determination of optimal conditions for obtaining a material combining low ash content and high carbon content. It was found that the content of phenols and paraffins in the resin of "Shubarkol Komir" is approximately 25% of each component. It is shown that the properties of the final coke depend on the ratio of the mixed pitches (1:1, 1:2, 2:1) and coking conditions (temperature 800-1000 °C, duration 4-6 h). Optimal characteristics (minimal ash content of 0.4%, maximal carbon content of 97.75%) were achieved with a pitch ratio of 1:2 and a temperature of 1000 °C for 6 h. A specific heat capacity in the range of 298-448 K was measured calorimetrically for this sample, where a type II phase transition was detected at 373 K. Electrophysical measurements in the range of 293-483 K revealed a complex temperature dependence of the resistance characteristic of a semiconductor with two sections of a narrow band gap (~0.67 eV and ~0.55 eV). The novelty of the work consists in a comprehensive study of composite mixtures of coal tar pitches and the influence of heat treatment parameters on the formation of thermophysical and electrophysical properties of electrode coke. For the first time, signs of a type II phase transition have been identified for this type of coke material and gigantic permittivity values (up to 10⁹) have been recorded, indicating its potential as a functional carbon material.