Related Experiment Video
Updated: Jan 9, 2026

The Effect of Construction and Demolition Waste Plastic Fractions on Wood-Polymer Composite Properties
Published on: June 7, 2020
Influence of Vine Shoot Waste and Its Derived Ash on the Properties of Cement Composites
Daniela Alexandra Scurtu1, Erika Andrea Levei1, Eniko Kovacs1
1Research Institute for Analytical Instrumentation Subsidiary, National Institute of Research and Development for Optoelectronics INOE 2000, 67 Donath Street, 400293 Cluj-Napoca, Romania.
Abstract:
The valorization of agricultural byproducts plays a critical role in advancing the circular economy. Vine cultivation produces significant amounts of biomass waste throughout the year, posing environmental challenges if left unmanaged. This study investigates the potential reuse of vine shoot waste and its derived ash as alternative components in cement-based materials. The properties of the composites containing 1% vine shoot waste or its derived ash incorporated in cement paste were comparatively assessed with those of cement paste prepared from Portland cement based on the Fourier-transform infrared spectra, X-ray diffraction patterns, scanning electron microscopy images, EDX elemental maps, and solid-state 27Al and 29Si nuclear magnetic resonance spectra and thermal analysis. Mechanical performance was assessed through flexural and compressive strength tests. The results confirm the potential of vine shoot waste use as a sustainable additive in cementitious materials and its contribution to reducing the environmental footprint of the cement industry.
More Related Videos
09:39Production and Testing of Moisture Behavior and Thermal Properties of Rapeseed Straw and Ganoderma resinaceum Mycelium Bio-Composites
Published on: September 5, 2025
11:07Preparation of Aligned Steel Fiber Reinforced Cementitious Composite and Its Flexural Behavior
Published on: June 27, 2018
Related Concept Videos
Additives and Fillers in Concrete
The...
Pozzolans
Fly ash is...
Strength of Cement
For compressive strength tests, ASTM C 109-05 standards prescribe a cement-sand mix ratio of 1:2.75 and a water/cement ratio of 0.485 for making 2-inch cubes. These cubes are mixed, cast, and cured in saturated lime water at 23°C until testing. Flexural strength testing, outlined in...
Fineness of Cement
Direct...
Impact Strength of Concrete
Abrasion Resistance of Concrete
One such test is the revolving disc test, where three plates...