Optimization of compression ratio in LHR engine fueled with nano Al₂O₃-emulsified biodiesel using RSM and machine...

This research explores the influence of different compression ratios (CRs) on the performance and emission properties of a fly ash-coated low heat rejection (LHR) diesel engine operated with a nano-Al₂O₃-based emulsified cotton seed biodiesel blend (B20W10Al200). An extensive experimental design was implemented based on the history data-based response surface methodology (RSM), taking brake power (BP) and CR as significant variables. Engine responses like brake thermal efficiency (BTE), brake specific fuel consumption (BSFC), and significant exhaust emissions (NOx, HC, CO, and smoke opacity) were examined over CR values of 16, 17, and 18. The findings identified CR18 as the best configuration, where the maximum BTE (29.03%) and minimum BSFC (0.269 kg kW^-1 h^-1) were obtained. A notable decrease in emissions was seen, most notably in CO (0.104%) and smoke opacity (19.3%), with NOx emissions significantly lower for CR16. To improve the predictive performance and facilitate optimization, machine learning methods were incorporated. Extreme gradient boosting (XGBoost) models performed efficiently, with R ² values greater than 0.90 for all the parameters. SHapley additive exPlanations (SHAP) revealed that brake power is the dominant control factor influencing the prediction of the response variable. Multi-response desirability-based optimization, performed through the Design-Expert software, indicated an optimum setup (maximize BTE/minimize BSFC and smoke while controlling NOx) at BP = 2.49 kW and CR = 18, which had a composite desirability value of 0.751. This study confirms the combined potential of thermal barrier-coated LHR engines and nano-emulsified biofuels under optimal conditions, validating the shift toward cleaner and more efficient combustion in compression ignition engines.