Efficacy of UVC Radiation in Reducing Bacterial Load on Dental Office Surfaces

Background/Objectives: Environmental contamination of dental surfaces is a major vector for cross-infection. Ultraviolet-C (UVC) irradiation provides rapid, chemical-free decontamination; however, depending on wavelength and ventilation conditions, ozone generation may occur. This study evaluated the germicidal efficacy of UVC on three high-touch surfaces: a wooden work table, a stainless-steel consumables table, and a dental unit table. Methods: Surfaces were sampled at baseline, after 5 min (27 mJ/cm²), and after 10 min (54 mJ/cm²) of UVC exposure at 90 µW/cm². Colony-forming units (CFU/cm²) were enumerated using Mueller-Hinton agar. Results: UVC achieved >99% reduction after 5 min and complete elimination after 10 min. Material properties (porosity, reflectivity, and grooves), along with quantified parameters like surface roughness (Ra) and contact angle, influenced minor differences in decontamination. Conclusions: Used with appropriate safety protocols, short-duration UVC irradiation effectively decontaminates dental surfaces and can complement chemical disinfection. Future studies must incorporate artificially soiled surfaces, biofilms, and emerging far-UVC/UV-LED technologies.