A Dual-Scale Encapsulation Strategy for Phase Change Materials: GTS-PEG for Efficient Heat Storage and Release

With the advancement of new power systems, phase-change materials (PCMs), owing to their ability to convert and store electrical energy, are increasingly recognized as a key solution to the intermittency of power supply. Nevertheless, such materials face challenges, including leakage and low thermal conductivity, which lead to reduced utilization efficiency. In this study, guar gum was used as the macroscopic framework, while self-prepared and optimized silica aerogel microsheets served as the microscopic framework to synergistically encapsulate the polyethylene glycol (PEG). Titanium dioxide (TiO₂) nanoparticles were incorporated to improve overall thermal conductivity, resulting in the composite PCM, GTS-PEG. In-depth characterization demonstrated effective PEG retention within the matrix, with a melting heat storage density of 164.16 J/g. Upon 30 min of continuous heating at 90 °C, the mass loss remained as low as 4.83%, indicating excellent thermal stability. The addition of TiO₂ increased thermal conductivity to 0.53 W/(m·K), representing a 140% boost over unmodified material. As a result, GTS-PEG not only successfully overcomes the leakage and thermal conductivity limitations of conventional PCMs but also, as a green and low-carbon innovative solution, paves a new path for the coordinated optimization and efficient conversion of power grid energy systems.