Eccentricity Fault Diagnosis System in Three-Phase Permanent Magnet Synchronous Motor (PMSM) Based on the Deep
Kenny Sau Kang Chu1, Kuew Wai Chew1, Yoong Choon Chang1
1Lee Kong Chian Faculty of Engineering and Science, Universiti Tunku Abdul Rahman, Kajang 43200, Malaysia.
Abstract:
Motor eccentricity faults, stemming from the misalignment of the rotor's center and pivot point, lead to significant vibrations and noise, compromising motor reliability. This study emphasizes the need for an efficient diagnostic system to enable early detection and correction of these faults. Our research proposes a novel Eccentricity Fault Diagnosis Network (E-FDNet), designed for integration into a Motor Eccentricity Fault Diagnosis System (MEFDS), utilizing neural networks for detection. Evaluation tests reveal that a hybrid Convolutional Neural Network-Long Short-Term Memory (CNN-LSTM) architecture is ideal as the internal neural network within the E-FDNet. Key contributions of this research include (1) E-FDNet that stabilizes transition predictions among SEF/DEF/MEF; (2) a steady-state characteristic normalization (SSCN) improving feature consistency under dynamic responses; (3) an integrated physics-FEM-experiment pipeline for controlled analysis and validation; (4) approximately 98.86% accuracy/F1 outperforming classical and deep baselines; and (5) a non-invasive, current-only sensing design suited for deployment.
Related Concept Videos
Three-Phase Short Circuit—Unloaded Synchronous Machine
This behavior occurs due to the magnetic flux produced by the short-circuit armature currents. Initially, these currents follow high-reluctance paths but eventually shift to...
Power System Three-Phase Short Circuits
Simplified Synchronous Machine Model
In this model, each generator is connected to a...
Generation of Three-Phase Voltage
As the rotor...
Sequence Networks of Rotating Machines
Zero-sequence current induces a voltage drop across the generator's neutral impedance and other...
Multimachine Stability
In analyzing the system, the nodal equations represent the relationship between bus voltages, machine voltages, and machine currents. The nodal equation is given by:


