Production of second-generation polyhydroxybutyrate from corn hydrolysis residue and biopolymer characterization - A...

Plastic pollution is a worldwide growing issue, compromising aquatic and terrestrial ecosystems. It is of urgent need to find different materials to substitute petrochemical plastics. One potential substitute is polyhydroxybutyrate (PHB), a microbial biopolymer that is accumulated as an energy reservoir intracellularly under carbon excess and nitrogen limitation. PHB has a high production cost, mainly due to expensive carbon sources. As an alternative, lignocellulosic materials can be used as a substrate, reducing PHB production costs. The use of lignocellulose-based feedstocks to produce second-generation (2G) PHB fits in the bioeconomy scenario, opening the possibility to redirect waste into the production of high-added value biomolecules. Therefore, this work aimed to use the lignocellulosic corn fraction (LCF, a residue linked to first-generation (1G) PHB production from milled corn) to produce 2G PHB using Cupriavidus necator LPB2327 strain, and characterize the obtained biopolymer. The produced 2G PHB was extracted with NaClO, being characterized and compared with commercial-grade PHB by FTIR, XRD, DSC, TGA, and CHN. The 2G PHB showed a crystallinity degree of 58.90%, a carbon and hydrogen content of 57.02% and 5.76%, respectively, with minimal nitrogen presence (< 0.1%). Additionally, the biopolymer showed an endothermic degradation profile, with a T_m of 174.2 °C (ΔH - 85.15 J/g) and a T_d of 294.7 °C (ΔH - 715.9 J/g). In all analyses, the produced 2G PHB showed similar characteristics to the commercial PHB. This study showed that it is possible to produce 2G PHB with commercial characteristics within a biorefinery and circular bioeconomy context.