Performance evaluation of a series-connected step-up/down partial power converter for battery energy storage...

The conventional full power converter (FPC) for battery energy storage applications is limited by bulky components and suboptimal efficiency. In response, a series-connected step-up/down partial power converter (SUDPPC) with high power density is proposed in this paper. It consists of an LLC resonant converter operating at a fixed switching frequency cascaded with a full-bridge converter capable of providing bipolar output. By connecting the SUDPPC in series with the load, the voltage stress on the series side and the current stress on the parallel side are markedly reduced. The four-quadrant function provides support for further optimization of the rated power level. Universal series interconnection schemes are elaborated, and design guidelines are formulated based on power distribution characteristics. Furthermore, the topology is evaluated in terms of nonactive power and component stress factor (CSF), and benchmarked against a four-switch buck/boost FPC and a phase-shifted full-bridge step-up partial power converter (SUPPC). Finally, a 1.1 kW prototype is developed to experimentally validate the theoretical analysis, demonstrating that only 14.3% of the total active power is processed under full-load conditions, with a peak efficiency of 98.15%.