Related Experiment Video
Updated: Jan 21, 2026

Extraction of Organochlorine Pesticides from Plastic Pellets and Plastic Type Analysis
Published on: July 1, 2017
Detection of Organochlorine Pesticides in Environmental Water Samples Using Effervescent Assisted Magnetic Micro
Yi Liu1,2, Haoxin Wang1,2, Zhiqianli Ma1,2
1College of Bioscience and Resource Environment, Beijing University of Agriculture, Beijing, P. R. China.
Abstract:
In this study, a novel effervescent-assisted magnetic micro solid-phase extraction (EA-MSPE) method was developed for the detection of four organochlorine pesticides (OCPs) in water samples. The adsorbent for this method consisted of magnetic biochar particles, which were created by loading Fe3O4 onto pomelo peel biochar. It combined effervescent compression technology to complete the automatic extraction process and utilized an applied magnetic field to achieve solid-liquid separation, thereby establishing the EA-MSPE method. Several experimental parameters that affect the extraction efficiency, including biochar dosage, acid-base conditions, pH, eluting solvent, and salt content, were investigated. The results indicated that the optimal conditions were as follows: a biochar dosage of 0.06 g, a ratio of sodium dihydrogen phosphate to sodium bicarbonate of 1:3, a pH of 10, an elution solvent composed of ethyl acetate and n-hexane (2:1), and 10% NaCl. The recoveries of the four OCPs ranged from 63.56% to 87.52%. The limits of detection varied between 0.17 and 0.95 µg/L. The relative standard deviations ranged from 6.0% to 9.2%. This method was based on effervescent technology and magnetic particles to achieve an automatic extraction and separation process, saving time, energy, and being environmentally friendly. The produced magnetic effervescent tablet was easy to carry, more suitable for field sampling and extraction, and has strong practicability.
More Related Videos
Related Concept Videos
Gas Chromatography: Types of Columns and Stationary Phases
For an analyte to remain on the column for a sufficient amount of time, it must exhibit some level of compatibility (or...
Gas Chromatography: Sample Injection Systems
Two primary injection methods are used...
Gas Chromatography: Introduction
In GC, a sample is vaporized and mixed with an inert carrier gas (the mobile phase), which transports it through a...
Gas Chromatography: Overview of Detectors
A non-destructive detector allows a sample to be analyzed without altering or consuming it, meaning the sample can be collected after detection for further analysis. Examples include thermal conductivity detectors and...
Gas Chromatography: Types of Detectors-II
Gas Chromatography: Types of Detectors-I
TCD is the earliest and most widely used detector that operates by measuring the changes in the thermal conductivity of the carrier gas. When a sample compound enters the detector,...

