Feasibility of Intraoperative Tissue Oxygen Saturation Imaging Using OXEI Technology During Robotic Esophagectomy: A

Susana Fortich1, Jennifer Den1, Mathew Thomas2

  • 1Department of Surgery, University of Texas Medical Branch, Galveston, TX, USA.

PubMed
Abstract

Related Concept Videos

Special considerations while measuring oxygen saturation01:19

Special considerations while measuring oxygen saturation

Assessing respiratory rate concurrently with pulse measurement is fundamental to patient care, providing valuable insights into the patient's respiratory function. The normal breathing rate for an adult usually falls within a normal range of 12 to 20 breaths per minute. Abnormal respiratory rates can signal underlying health conditions or the need for immediate intervention.
Ensuring accuracy in vital sign recordings while prioritizing patient comfort and minimizing anxiety is...
975
Solution Equilibrium and Saturation01:59

Solution Equilibrium and Saturation

Imagine adding a small amount of sugar to a glass of water, stirring until all the sugar has dissolved, and then adding a bit more. You can repeat this process until the sugar concentration of the solution reaches its natural limit, a limit determined primarily by the relative strengths of the solute-solute, solute-solvent, and solvent-solvent attractive forces. You can be certain that you have reached this limit because, no matter how long you stir the solution, undissolved sugar remains. The...
21.9K
Resistors In Series01:10

Resistors In Series

A resistor is an ohmic device that limits the flow of charge in a circuit. Most circuits have more than one resistor. If several resistors are connected together and connected to a battery, the current supplied by the battery depends on the equivalent resistance of the circuit. The equivalent resistance of a combination of resistors depends on both their individual values and how they are connected. The simplest combination of resistors is the series combination. 
In a series circuit, the...
6.4K
Series Resonance01:17

Series Resonance

The RLC circuit impedance is defined as the ratio of the supply voltage to the circuit current. Resonance in such a circuit occurs when the imaginary part of this impedance equals zero. This specific condition means that the inductive reactance is exactly equal to the capacitive reactance. The frequency at which this happens is known as the resonant frequency. Mathematically, the resonant frequency is inversely proportional to the square root of the product of the inductance (L) and capacitance...
809
Series and Parallel Capacitors01:14

Series and Parallel Capacitors

Capacitors, fundamental components in electronic circuits, can be connected in series and/or parallel configurations. Each configuration has different impacts on the overall behavior of the circuit.
First, consider capacitors connected in series to a battery. In this configuration, the plate connected to the battery's positive terminal develops a positive charge, while the plate attached to the negative terminal becomes negatively charged. An equal magnitude of charge is induced on the...
9.4K
Trigonometric Fourier series01:17

Trigonometric Fourier series

Fourier series is a foundational mathematical technique that decomposes periodic functions into an infinite series of sinusoidal harmonics. This method enables the representation of complex periodic signals as sums of simple sine and cosine functions, facilitating their analysis and interpretation in various fields, including signal processing, acoustics, and electrical engineering.
The trigonometric Fourier series specifically expresses a periodic function with a defined period T using sine...
801