Related Experiment Video
Updated: Feb 7, 2026

Production and Characterization of Vacuum Deposited Organic Light Emitting Diodes
Published on: November 16, 2018
Enhanced hole transport of nonpolar InGaN-based light-emitting diodes with lateral p-type superlattice doping
Hongchang Tao1, Shengrui Xu1, Yachao Zhang1
1State Key Laboratory of Wide-Bandgap Semiconductor Devices and lntegrated Technology, School of Microelectronics, Xidian University, Xi'an 710071, China.
Abstract:
In this work, we propose a novel structure for nonpolar (10-10)-plane InGaN-based light-emitting diode (LED) using a lateral p-type Al0.2Ga0. 8N/GaN superlattice structure as the hole injection layer. The main objective is to increase the hole concentration and facilitate vertical hole injection. The nonpolar InGaN-based LED lacks polarization along the growth plane (10-10), but the lateral direction along [0001] exhibits strong polarization. Therefore, the Al0.2Ga0. 8N/GaN superlattice structure, which is periodic along the [0001] direction, induces net polarization charges at the GaN/Al0.2Ga0. 8N interface, resulting in increased ionization rates of the acceptors. Additionally, the high-density two-dimensional hole gases formed at the Al0.2Ga0. 8N/GaN interfaces along the [0001] direction can efficiently inject vertically into the quantum wells. Based on the numerical simulation results, the proposed LED structure offers improved electrical characteristics, effective hole injection, and enhanced optical performance compared to the nonpolar LED with conventional p-type doping structure.
More Related Videos
10:41Enhanced Electron Injection and Exciton Confinement for Pure Blue Quantum-Dot Light-Emitting Diodes by Introducing Partially Oxidized Aluminum Cathode
Published on: May 31, 2018
11:04An In-House-Built and Light-Emitting-Diode-Based Photodynamic Therapy Device for Enhancing Verteporfin Cytotoxicity in a 2D Cell Culture Model
Published on: January 13, 2023
Related Concept Videos
Structure of Lipids
Types of Non-structural Cracks in Concrete
Plastic shrinkage cracks typically form within hours after the concrete is poured. The concrete's surface dries faster than the bottom, creating tensile stress that the still-plastic concrete cannot withstand, leading to diagonal or randomly patterned cracks on the concrete surface.
Zener Diodes
Light Acquisition
Facilitated Transport
The Ideal Diode