Hydrothermal Conversion of Wastewater Treatment Sands into Dual-Phase FAU/LTA Zeolite: Structural Insights and...

This study presents a sustainable valorization strategy for wastewater treatment plant (WWTP) residual sands through their hydrothermal conversion into a dual-phase FAU/LTA zeolite and evaluates its adsorption performance toward methylene blue (MB) as a model cationic contaminant. The synthesized material (ZEO-RS) exhibited a low Si/Al ratio (~1.7), well-developed FAU supercages with minor LTA domains, and high structural integrity, as confirmed by XRD, FTIR, XRF, SEM and PZC analyses. ZEO-RS demonstrated rapid adsorption kinetics, reaching approximately 92% of equilibrium uptake within 30 min and following a pseudo-second-order kinetic model (k₂= 2.73 g·mg^-1·h^-1). Equilibrium data were best described by the Langmuir isotherm, yielding a maximum adsorption capacity of 34.2 mg·g^-1 at 20 °C, with favorable separation factors (0 < r_L < 1), while Freundlich fitting indicated moderate surface heterogeneity. Thermodynamic analysis revealed that MB adsorption is spontaneous (ΔG° = -11.98 to -12.56 kJ·mol^-1), mildly endothermic (ΔH° = +5.26 kJ·mol^-1), and entropy-driven (ΔS° = +0.059 kJ·mol^-1·K^-1). FTIR evidence, combined with pH-dependent behavior, indicates that adsorption proceeds via synergistic electrostatic attraction, pore confinement within FAU domains, and partial ion-exchange interactions. Desorption efficiencies conducted under mild acidic, neutral, and alkaline conditions resulted in low MB release (1-8%), indicating strong dye retention and high framework stability. Overall, the results demonstrate that WWTP residual sands are an effective and scalable low-cost precursor for producing zeolitic adsorbents, supporting their potential application in sustainable water purification and circular-economy-based wastewater treatment strategies.