Related Experiment Video
Updated: Feb 17, 2026
Experimental Protocol for Biodiesel Production with Isolation of Alkenones as Coproducts from Commercial Isochrysis Algal Biomass
Published on: June 24, 2016
A New Magnetically Separable BaFe2O4 Acid Catalyst for Sustainable Biodiesel Production: L9 Taguchi Optimization and
Matheus Arrais Gonçalves1, Hiarla Cristina Lima Dos Santos1, Vicente da Silva Lima2
1Federal University of Pará, Institute of Exact and Natural Sciences, Graduate in Chemistry Program, Laboratory of Catalysis and Oleochemical, Belém, Pará 66075-110, Brazil.
None:
The MoO3/BaFe2O4 catalyst was synthesized via a combined coprecipitation and wet impregnation approach and subsequently applied in the methyl biodiesel production from waste cooking oil (WCO). The material was characterized using surface acidity measurements, XRD, FTIR, SEM, EDS, and VSM techniques. The results confirmed: (i) the successful synthesis of barium ferrite (BaFe2O4), and (ii) the effective impregnation of MoO3 onto the ferrite matrix. Process optimization was conducted using the Taguchi L9 methodology, evaluating four operational parameters: temperature (120-180 °C), methanol:WCO molar ratio (20:1-40:1), catalyst concentration (2-10 wt %), and reaction time (1-5 h). The high coefficient of determination (R 2 = 0.9410) confirmed the model's robustness and predictive capability for ester content. The optimal conditions (temperature = 172 °C, methanol:WCO molar ratio = 28:1, catalyst concentration = 7.5 wt %, time = 4 h) yielded a maximum conversion of 96.4% into methyl esters. Notably, the catalyst exhibited: (i) exceptional recyclability, maintaining efficiency above 90% after seven consecutive cycles, and (ii) facile magnetic separation under an external magnetic field. Furthermore, the physicochemical properties of the produced biodiesel fully complied with ASTM D6751 and EN 14214 standards, underscoring the catalyst's potential for industrial-scale transesterification processes.
