Related Experiment Video
Updated: Feb 23, 2026

Design and Use of a Full Flow Sampling System FFS for the Quantification of Methane Emissions
Published on: June 12, 2016
Continuous measurements reveal wind and temperature affect orphan well methane emissions on the Kevin-Sunburst Dome,
Nicholas J Gianoutsos1, Karl B Haase2, Justin E Birdwell1
1U.S. Geological Survey, Central Energy Resources Science Center, Denver, CO, United States of America.
Abstract:
Fifteen leaking orphan wells on the Kevin-Sunburst Dome in northern Montana had emission rates that were affected by surface winds and diurnal temperature swings based on continuous monitoring data. Some wells showed correlating spikes in emissions when temperatures changed or wind speed increased while others demonstrated independent flow behavior despite being drilled into the same reservoir and located only a few hundred meters apart. Time-weighted mean methane emission rates ranged from non-detectable levels up to 2.7 kg/h in their as-discovered conditions, with leaking wells averaging 211 g/h. Emissions were measured continuously for up to 452 h per well during monitoring, revealing that leak rates can fluctuate by an order of magnitude within hours. Fluctuations in emission rates often synchronized between wells with overlapping emission measurement intervals, suggesting weather conditions, such as temperature and wind, affect emission rates (up to a factor of 4) with the most relevant factor being the effect of wind on wells with open holes. Additionally, this study presents the first methane emissions measured from an orphan well in two distinct conditions: as initially discovered (closed leaking valve, 2.7 kg/h) and again under unrestricted flow conditions (open valve, 11.8 kg/h), illustrating the maximum unobstructed leak rate and quantifying the constraints restricted leaking wells can have on emissions compared to open holes.
Related Concept Videos
Temperature Measurement Sites
Oral: When assessing oral temperature, the thermometer tip should be placed under the tongue in the posterior sublingual pocket. It offers accurate readings and can be...
Measurement of Air Content in Concrete
The pressure method,...
Gas Thermometers and the Kelvin Scale
Measurement of Fluid Pressure
A basic form of manometer is the piezometer, a vertical tube open at the top and filled with the same...

