Related Experiment Video
Updated: May 5, 2026

Preparation of Light-responsive Membranes by a Combined Surface Grafting and Postmodification Process
Published on: March 21, 2014
Thermally Intensified Synthesis of Polyester Membranes for Highly Selective Removal of Haloacetic Acids
Bin Liu1, Qingzhi Liu2, Qian Xiao1
1Department of Civil Engineering, The University of Hong Kong, Pokfulam, Hong Kong Island, Hong Kong SAR 999077, P. R. China.
Abstract:
Commercial polyamide nanofiltration membranes show partial success in removing toxic micropollutants such as haloacetic acids (HAAs) from drinking water. However, these tight membranes suffer from limited selectivity between mineral ions (e.g., Ca2+, Mg2+) and HAAs, causing severe scaling on the membrane surface and loss of beneficial minerals. Herein, we adopted a thermally intensified interfacial polymerization (IP) method to construct a loose and negatively charged polyester membrane. Gallic acid, rich in hydroxyl and carboxyl groups, was used as the aqueous-phase monomer to react with a preheated Isopar G solution of trimesoyl chloride (with an organic-phase temperature up to 125 °C). The elevated temperature facilitates monomer diffusion and accelerates the IP reaction by several orders of magnitude, allowing the formation of the polyester membranes within a short reaction time of merely 10 min under mild pH conditions. The optimal polyester membrane GANF-100 demonstrated >90% rejection for five regulated HAAs, outperforming commercially available polyamide membranes in terms of mineral/HAA selectivity, Ca2+/SO42- selectivity, and antiscaling behavior. This study paves the way for the facile fabrication of polyester membranes toward the effective removal of toxic organic micropollutants.
Related Concept Videos
Multiple Halogenation of Methyl Ketones: Haloform Reaction
Acetals and Thioacetals as Protecting Groups for Aldehydes and Ketones
In the presence of multiple functional groups, when selective reduction of one group over the other is desired, groups like aldehydes and ketones that form acetals...
Acid Halides to Carboxylic Acids: Hydrolysis
As shown below, the mechanism involves a nucleophilic attack by water at the carbonyl carbon to form a tetrahedral intermediate. This is followed by the reformation of the carbon–oxygen π bond along with the departure of a halide ion. A final proton transfer step yields...
Acid Halides to Esters: Alcoholysis
Acid-Catalyzed α-Halogenation of Aldehydes and Ketones
In the first step of the mechanism, the acid protonates the carbonyl oxygen resulting in a resonance-stabilized cation, which subsequently loses an α-hydrogen to form an enol tautomer. The C=C bond in an enol is highly nucleophilic because of the electron-donating nature of the –OH group. Consequently, the double bond attacks an electrophilic...
Types of Step-Growth Polymers: Polyesters
Polyesters are commonly prepared from terephthalic acid and ethylene glycol; the crude product is known as poly(ethylene terephthalate) or PET. However, polyesters are synthesized industrially by transesterification of dimethyl terephthalate with ethylene glycol at 150 °C. The two reactants and the...

