Ultrasonic-shear exfoliated multi-layer graphene flakes for enhanced triboelectric nanogenerator performance toward...

Triboelectric nanogenerators (TENGs) can effectively harvest mechanical energy from the environment, offering a promising solution for a sustainable power supply in wearable electronics. However, their widespread application is often hindered by expensive raw materials and complex fabrication processes. This study develops a simple and efficient integrated ultrasonic-shear process to exfoliate low-cost flake graphite (FG) into multi-layer flake graphite (MLFG), which is then embedded into polydimethylsiloxane (PDMS) to fabricate a novel composite triboelectric layer. The multi-layered structure of MLFG provides a larger specific surface area and more charge trapping sites, significantly enhancing capacitive behavior. The optimized 2 wt% MLFG-TENG achieved an open-circuit voltage of 90.3 V and a short-circuit current of 4.6 μA, which are 1.2 times and 1.6 times higher than those of the 3 wt% FG-TENG and 3.1 times and 4.2 times higher than those of the pure PDMS-TENG, respectively. This method delivers superior output performance with lower doping levels and maintains stable output after 20 000 cycles, demonstrating exceptional scalability. Furthermore, by integrating a rectifier circuit, the MLFG-TENGs successfully power small electronic devices such as LED arrays and electronic clocks. Concurrently, when integrated with machine learning, the MLFG-TENGs achieve 100% accurate recognition of five distinct hand motion patterns, highlighting their great potential in the fields of self-powered wearable devices and motion sensing.