Study on Rheological Properties and Enhancement Mechanisms of Ethylene-Vinyl-Acetate-Copolymer-Modified Cement...

This study addresses the brittleness, poor bonding, and low crack resistance of ordinary Portland cement (OPC) grouting materials by incorporating an ethylene-vinyl acetate (EVA) copolymer. The enhancement mechanisms and engineering applicability of EVA-modified cement grouts were systematically investigated. Using EVA contents from 0% to 20%, macro-scale tests covering fluidity, rheology, bleeding rate, and compressive strength were conducted, along with microstructural analyses (SEM, XRD, FT-IR). Results indicate that with 12% EVA, the 28-day compressive strength reached 21.03 MPa, reflecting a 68% increase over the unmodified grout. Most favorable amount of EVA promoted the formation of C-S-H gel, filled microcracks, and enhanced structural densification, whereas excessive EVA content led to the formation of a polymer film that hindered hydration and reduced strength. Furthermore, EVA effectively improved the rheological behavior of the grout, with the Vipulanandan model demonstrating superior accuracy over the Bingham model in characterizing its non-Newtonian flow. This study systematically established a quantitative-qualitative correlation between EVA content, nonlinear rheological behavior (characterized by advanced models), microstructure evolution (porosity, C-S-H, polymer film) and final macromechanics and durability.