Sustainable Epoxy Composites Filled with Natural Mineral Rocks: Comparative Evaluation of Mechanical, Thermal, and...

This study presents the fabrication and optimization of eco-efficient epoxy composites reinforced with ground natural stone fillers, namely pebble, sandstone, and marble, at loadings of up to 15.6 wt.%. Low content of a bio-based modifier, modified castor oil (MCO ≈ 0.5 wt.%), is incorporated to improve filler dispersion, processing behavior, and matrix-filler interfacial compatibility. The composites are designed to enhance mechanical, thermal, and dielectric performance using low-cost, abundant, and environmentally sustainable constituents. An experimental optimization approach is employed to evaluate and optimize bulk density, Shore D hardness, thermal conductivity, dielectric constant, and tensile strength. The results demonstrate that pebble-reinforced composites exhibit the highest tensile strength (≈30 MPa) and surface hardness (≈82 Shore D), which are attributed to the angular morphology and high intrinsic rigidity of pebble particles. Marble-filled systems show superior thermal stability, with residual mass increasing from approximately 2.5 wt.% for neat epoxy to over 11 wt.% at 550 °C, owing to the thermally stable calcium carbonate phase. In contrast, sandstone-reinforced composites exhibit the lowest dielectric constant (≈3.2), indicating enhanced electrical insulation capability. Fourier-transform infrared spectroscopy (FTIR) results confirm that the epoxy network structure is preserved upon filler incorporation, while MCO promotes improved interfacial interactions through physical interactions. Thermogravimetric analysis (TGA) and scanning electron microscopy (SEM) reveal enhanced thermal resistance, reduced microvoid formation, and improved filler-matrix adhesion at optimal filler contents of approximately 3.5 wt.%.